- Spring Products
- Outdoor Recreation
- Health & Lifestyle
- Infrared Saunas
- Kids Toys
- Bigfoot Snowshoes
ClearWater Design 12ft Kayak - Muskoka
The Muskoka is ClearWater Design's fast and true tracking day touring kayak. This boat tracks well and offers a standard size opening with a very spacious cockpit with lots of leg room. Beginners and experienced padlers alike will love to get out on the water in the Muskoka.
The rear compartment, with large hatch, provides ample storage for day trips, while the contoured seat has a padded cover and the backrest has an inflatable air bladder for lumbar support.
All of our kayaks are made from linear polyethylene. They require no treatment to maintain the surface and can be stored outside year round.
- padded seat with pump up lumbar support
- adjustable footstops
- thigh pads
- minicell foam bulkhead
- 2 storage compartments
- integrated paddle rest
- deck rigging
- self rescue straps
- carry handles
Ontario - Boating Safety Equipment Requirements
For Canoes, Kayaks, Rowboats and Rowing Shells
One approved personal flotation device (PFD) or lifejacket of appropriate size for everyone on board. Each device must have the Department of Transport Canada or Canadian Coast Guard/Fisheries and Oceans label and be in good working order.
A buoyant heaving line at least 15 metres (50 feet) long
A bailer or manual water pump *
A sound signaling device or appliance (whistle or air horn)
Approved navigation lights if the craft is operated after sunset, before sunrise or in periods of restricted visibility
* Not needed in a Sit-On-Top that is self-bailing or cannot hold
enough water to make it capsize.
Clearwater Design offers a one year limited warranty on all parts which covers manufacturer's defect. The hulls are covered by a five year warranty against cracking, tearing, puncture or wear-through occuring in normal use.
ClearWater Design is making an effort to help preserve our environment. All of their scrap polyethylene is ground down and re-used. In their canoes the end caps, and in their kayaks, the seats are made from the recycled polyethylene. In 2007 they started using biodegradable bags to wrap and ship all of their boats.
All Clearwater Design canoes and kayaks are made from linear polyethylene. They require no treatment to maintain the surface and can be stored outside year round.
For short term storage, you should turn your canoe or kayak upside down when left on the ground or dock. Always try to store your boat on a rack or hanging in slings. Canoes should be supported by their gunwales. Kayaks can be hung on their sides or upside down; try to place your supports at the bulkheads.
If you develop a dent in your canoe or kayak due to improper storage or from over-tightening your tie down straps, here are some suggestions. First, let the boat sit in the hot sun. Often, the dent will come out all by itself. If that doesn't work, prop the boat up on a couple of camp chairs so that it is supported near the ends. Place a weight, such as a bag of sand, on the indented area and let it sit for a couple of hours. For best results, this should be done outside on a hot sunny day. You can also warm the dented area by pouring hot water over the area before placing the weight.
Click the images below to see larger versions.
Other Products in Outdoor Recreation
Kodiak 20 Litre Tapered Bag #08599 - Yellow
Drift Go-Kart Kill Switch
ClearWater Design 16 ft Nunavut Tandem Kayak
Baja 10 Litre Dry Bag